LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Driver Assistance Systems - Repair Instructions) >> Repair Instructions >> Side Obstacle Detection Control Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Side Obstacle Detection Control Module Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
GM5313775Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Callout Component Name
Preliminary Procedure 
Rear Bumper Fascia Removal and Installation (without Blackwing) , or Rear Bumper Fascia Removal and Installation (with Blackwing)
1 Side Object Sensing Alert Module Bolt [2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5N.m (22 lb in)
2 Side Object Sensing Alert Module [2x]

Procedure

  1. Disconnect the electrical connector.
  2. Slide the module out of the retaining bracket.
  3. Perform the necessary programming and setup procedure:Control Module References