LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Volt LT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel System- - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1 >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. GM4091551Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Exhaust Gas Recirculation Cooler Temperature Sensor (4) - Install and tighten 42N.m (31 lb ft)

  2. Exhaust Gas Recirculation Cooler Temperature Sensor Wiring Harness@Camshaft Cover Bracket (2) - Install
  3. Connect the electrical connector. (1)
  4. Intake Manifold Cover Replacement - Install
  5. Battery Negative Cable Disconnection and Connection - Connect
scientia non olet · About LEMON Manuals