LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Traverse LS, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Programming And Setup) >> Repair Instructions >> K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Ignition - On/Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions for the control module: K36 Inflatable Restraint Sensing and Diagnostic Module
  3. Perform the SPS function: Programming and Setup
scientia non olet · About LEMON Manuals