LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Traverse L >> Repair and Diagnosis >> Electrical >> Starter >> 12 V Starting And Charging System >> Repair Instructions >> Battery Monitor Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. GM4736948

    Battery Sensor Module (2) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
  3. GM4736946

    Electrical Connector (1) - Connect

  4. GM4728656

    Battery Negative Cable (2) - Install

  5. Battery Negative Cable Nut (1) @ Battery Sensor Module (3) - Install and tighten 11 N.m (97 lb in)
scientia non olet · About LEMON Manuals