Circuit/System Verification
- Ignition ON.
- Verify DTC C122F is not set.
- If the DTC is set
- Ignition OFF.
- Allow 30 min for the clutch to cool completely down.
- Perform key cycle, ignition OFF then ON.
- Clear DTC.
- Verify DTC C122F is not set.
- If the DTC is set, replace K47 Rear Differential Clutch Control Module.
- Go to next step: If the DTC is not set.
- All OK.
- Go to next step: If the DTC is not set
- All OK.