LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K17 Electronic Brake Control Module: Programming And Setup >> Replace and Program Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Control Module

To program a replacement control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K17 Electronic Brake Control Module - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K17 Electronic Brake Control Module - Setup and Configuration follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  6. With a scan tool, perform the Electronic Brake Control Module-Control Functions Automated Brake Bleed following the scan tool instructions. Refer to Antilock Brake System Automated Bleed .
scientia non olet · About LEMON Manuals