Fastener Specifications
WARNING: This page is about a different variant/trim than selected.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Clutch Actuator Cylinder Bolt | 13 N.m (115 lb in) |
| Clutch Pedal Assembly to Brake Pedal Bolts | 20 N.m (15 lb ft) |
| Clutch Pedal Position Switch Bolt | 2.5 N.m (22 lb in) |
| Clutch Pressure Plate Bolt Refer to procedure for tightening sequence and torque values. |
Clutch Assembly Replacement (M13) Clutch Assembly Replacement (MJK, MH3, MM6) |
| Clutch Slave Cylinder | 9 N.m (80 lb in) |
| Concentric Actuator Cylinder Bolt | 13 N.m (115 lb in) |