October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Install a NEW fuel sender O-ring gasket (2) to the fuel sender (1).
Courtesy of GENERAL MOTORS COMPANY
- Lower the fuel sender (1) into the fuel tank while connecting the fuel tank fuel pump module fuel pickup (2) to the fuel sender (1).
Courtesy of GENERAL MOTORS COMPANY
- Install the fuel sender lock ring (1) to the fuel tank (2).
- Install the EN-48482
Fuel Sender Lock Ring Wrench to the fuel sender lock ring (1).
- Using the EN-48482
Fuel Sender Lock Ring Wrench and a long breaker-bar, rotate the fuel sender lock ring (1) in a clockwise direction in order to lock the lock ring.
- Connect the fuel tank sender wiring harness electrical connector.
- Install the fuel tank. Refer to Fuel Tank Replacement .