LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> Battery Electrical Drain/Parasitic Load Test >> Circuit/System Verification >> Using an Inductive Pickup Probe
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Using an Inductive Pickup Probe

  1. Connect an inductive pickup probe to the negative battery cable that can read down to 1 mA.
  2. Ignition OFF, as the vehicle systems shut down test for less than 30 mA of parasitic current drain.
    • If greater than the specified range, refer to Circuit/System Testing.
scientia non olet · About LEMON Manuals