LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Install the battery current sensor (2) onto the battery negative cable (1) as shown.
    Fig 1: Battery Current Sensor And Battery Negative Cable
    GM4009329Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery negative cable to the frame rail and tighten the battery negative and positive cable ground nut (3) to 22 N.m (16 lb ft).
    Fig 2: Body Harness Connector And Battery Current Sensor
    GM4009328Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  3. Connect the body harness connector (1) to the battery current sensor (2).
  4. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals