LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> SS Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Assembly Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Turn Signal Switch Bracket
    GM3414291Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    For vehicles fitted with SMART KEY, ensure the electric steering lock mechanism is UNLOCKED before disabling the SIR System. Refer to SIR Disabling and Enabling .

    NOTE:

    Upon completing this procedure, leave the steering column in the fully lowered and extended position to aid further procedures.

  1. Remove Turn Signal Switch Bracket (1) - Turn Signal Switch Bracket Replacement
    2. Fig 2: Front Floor Console
    GM3232500Courtesy of GENERAL MOTORS COMPANY
  2. Remove Front Floor Console (1) - Front Floor Console Replacement (Automatic) Front Floor Console Replacement (Manual) 
    3. Fig 3: Front Floor Console Extension Panel - Left Side
    GM3533140Courtesy of GENERAL MOTORS COMPANY
  3. Remove Front Floor Console Extension Panel - Left (1) - Front Floor Console Extension Panel Replacement - Left Side 
    4. Fig 4: Front Floor Console Extension Panel - Right Side
    GM3533138Courtesy of GENERAL MOTORS COMPANY
  4. Remove Front Floor Console Extension Panel - Right (1) - Front Floor Console Extension Panel Replacement - Right Side 
    5. Fig 5: Windshield Garnish Molding Assembly
    GM3586050Courtesy of GENERAL MOTORS COMPANY
  5. Remove Windshield Garnish Molding (1) - Windshield Garnish Molding Replacement
    6. Fig 6: Instrument Panel Outer Trim Covers
    GM3402826Courtesy of GENERAL MOTORS COMPANY
  6. Remove Instrument Panel Outer Trim Cover (1) - Instrument Panel Outer Trim Cover Replacement 
    7. Fig 7: Floor Front Air Outlet Duct - Left Side
    GM3417424Courtesy of GENERAL MOTORS COMPANY
  7. Remove Floor Front Air Outlet Duct - Left Side (2) - Floor Front Air Outlet Duct Replacement - Left Side
    8. Fig 8: Radio & Fasteners
    GM3559709Courtesy of GENERAL MOTORS COMPANY
  8. Remove Radio (2) - Radio Replacement
    9. Fig 9: Radio Front Center Speaker & Fasteners
    GM3559713Courtesy of GENERAL MOTORS COMPANY
  9. Remove Radio Front Center Speaker (2) - Radio Front Center Speaker Replacement
    10. Fig 10: Instrument Cluster Assembly
    GM3402863Courtesy of GENERAL MOTORS COMPANY
  10. Remove Instrument Cluster (2) - Instrument Cluster Replacement
  11. Take caution to ensure the fabric closeout base plate pegs are released prior to removal.
    12. Fig 11: Head-Up Display Bezel
    GM3530736Courtesy of GENERAL MOTORS COMPANY
  12. Remove Head-Up Display Bezel (1) - Head-Up Display Bezel Replacement 
    13. Fig 12: Right Front Floor Air Outlet Duct & Mounting Components
    GM3417760Courtesy of GENERAL MOTORS COMPANY
  13. Remove Floor Front Air Outlet Duct - Right Side (3) - Floor Front Air Outlet Duct Replacement - Right Side
    14. Fig 13: Side Instrument Panel Upper Trim Panel & Mounting Bolts
    GM3402825Courtesy of GENERAL MOTORS COMPANY
  14. Remove Instrument Panel Upper Trim Panel - Right Side (2) - Instrument Panel Upper Trim Panel Replacement - Right Side 
    15. Fig 14: Instrument Panel Assembly Fasteners
    GM3512767Courtesy of GENERAL MOTORS COMPANY
  15. Remove Instrument Panel Bolt (1) (Qty: 5)
    16. Fig 15: Side Window Defogger Outlet Outer Duct - Left Side
    GM3541177Courtesy of GENERAL MOTORS COMPANY
  16. Remove Side Window Defogger Outlet Outer Duct - Left Side (1) - Side Window Defogger Outlet Outer Duct Replacement - Left Side
    17. Fig 16: Instrument Panel Lower Airbag - Driver Side
    GM3582144Courtesy of GENERAL MOTORS COMPANY
  17. Remove Instrument Panel Lower Airbag - Driver Side (2) - Instrument Panel Lower Airbag Replacement - Driver Side
    18. Fig 17: Instrument Panel Assembly Fasteners
    GM3512768Courtesy of GENERAL MOTORS COMPANY
  18. Remove Instrument Panel Bolt (1) (Qty: 3)
  19. Disconnect the data link connector.
    20. Fig 18: Instrument Panel Assembly Fasteners
    GM3512770Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    These screws are longer than all other instrument panel assembly fasteners.

  20. Remove Instrument Panel Bolt (1) (Qty: 4)
    21. Fig 19: Front Floor Console Rear Air Duct Retainer
    GM4539192Courtesy of GENERAL MOTORS COMPANY
  21. Remove Front Floor Console Rear Air Duct Retainer (1) (Qty: 2)
    22. Fig 20: Shift Knob Trim Plate & Boot Assembly
    GM2964476Courtesy of GENERAL MOTORS COMPANY
  22. Remove Transmission Control Lever Knob (1) - Transmission Control Lever Knob Replacement
    23. Fig 21: Selector Lever Housing
    GM1954236Courtesy of GENERAL MOTORS COMPANY
  23. Disconnect the selector lever housing (2) from the base (1) by depressing the four retaining tabs (3). Automatic Transmission Shift Lock Control Actuator Replacement
  24. Disconnect the electrical connectors.
    25. Fig 22: Instrument Panel Assembly Fasteners
    GM3512771Courtesy of GENERAL MOTORS COMPANY
  25. Remove Instrument Panel Bolt (1) (Qty: 3)
    26. Fig 23: Side Window Defogger Outlet Outer Duct - Right Side
    GM3541175Courtesy of GENERAL MOTORS COMPANY
  26. Remove Side Window Defogger Outlet Outer Duct - Right Side (1) - Side Window Defogger Outlet Outer Duct Replacement - Right Side
    27. Fig 24: Instrument Panel Assembly & Airbag Inflatable Fasteners
    GM3512772Courtesy of GENERAL MOTORS COMPANY
  27. Remove Instrument Panel Bolt (1) (Qty: 2)
  28. Remove Instrument Panel Airbag Inflatable Bolt (2) (Qty: 2)
  29. Remove the electrical connector to the instrument panel inflatable restraint module airbag inflatable.
  30. Remove the upper right duct air temperature sensor connector.
    31. Fig 25: Sun Load Temperature & Headlamp Automatic Control Ambient Light Sensor Bezel
    GM3402872Courtesy of GENERAL MOTORS COMPANY
  31. Remove Sun Load Temperature and Headlamp Automatic Control Ambient Light Sensor Bezel (1) - Sun Load Temperature and Headlamp Automatic Control Ambient Light Sensor Bezel Replacement
    32. Fig 26: Instrument Panel Assembly
    GM3512773Courtesy of GENERAL MOTORS COMPANY
  32. Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
  33. Apply tape to the steering column adjustment lever and the surrounding edges of the instrument panel to prevent marring.
  34. Ensure all instrument panel assembly dowels (side and centre) are released.
  35. Disconnect the wiring connector to the accessory power receptacle/cigar lighter.
  36. Loosen and raise the instrument panel assembly (1) to allow access to disconnect the wiring harness from the instrument panel assembly at the indicated points.
  37. With the aid of an assistant, raise the instrument panel assembly (1) clear of the gear shifter, over the steering column and then remove from the vehicle.
  38. When replacing the instrument panel assembly (1), transfer all necessary components.
scientia non olet · About LEMON Manuals