LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (LFV) - Repair Instructions >> Repair Instructions >> Fuel Injector Wiring Harness Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Connect the fuel injector wiring harness connectors (2) to the fuel injectors (3).
    Fig 1: Fuel Injector
    GM3982080Courtesy of GENERAL MOTORS COMPANY
  2. Position the fuel injector wiring harness to the fuel injection fuel rail and install NEW wiring harness tie straps (1).
  3. Connect the fuel injector wiring harness connector (1) to the fuel injection fuel rail fuel pressure sensor.
    Fig 2: Fuel Injector Wiring Harness
    GM3982086Courtesy of GENERAL MOTORS COMPANY
  4. Install a NEW wiring harness tie strap (1).
  5. Clip the fuel injector wiring harness (3) to the fuel injection fuel rail.
  6. Fuel Injection Fuel Rail Assembly - Install Fuel Injection Fuel Rail Assembly Replacement 
scientia non olet · About LEMON Manuals