LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Corvette Z06, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LT1 LT4) - Repair Instructions >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the right fuel tank. Refer to Fuel Tank Replacement - Right Side .
    2. Fig 1: Turn Fuel Sender Locking Ring
    GM3415301Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The fuel sender is spring loaded and will spring upward when the locking ring is removed.

  2. Using the CH-48482  lock ring tool, turn the fuel sender locking ring (1) counterclockwise and remove lock ring.
    3. Fig 2: Fuel Sender
    GM3415300Courtesy of GENERAL MOTORS COMPANY
  3. Lift the fuel sender (1) carefully to disconnect the lines from the fuel sender (1) inside the tank.
  4. Remove the fuel sender (1) from the tank.
scientia non olet · About LEMON Manuals