LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1 >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING:

Refer to Exhaust Service Warning

  1. Disconnect. Refer to Battery Negative Cable Disconnection and Connection
  2. Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
    3. Fig 1: EGR Cooler Temperature Sensor, Wiring Harness, EGR Cooler, Camshaft Cover Bracket And Electrical Connector
    GM4091551Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connector (1).
  4. Remove Exhaust Gas Recirculation Cooler Temperature Sensor Wiring Harness @ Camshaft Cover Bracket (2)
  5. Remove Exhaust Gas Recirculation Cooler Temperature Sensor (4) @ Exhaust Gas Recirculation Cooler (3)
scientia non olet · About LEMON Manuals