LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Engine Controls And Fuel - 1.2L - Repair Instructions) >> Repair Instructions >> Engine Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ECM retaining nut (3) and tighten to 10 N.m (89 lb in).
    Fig 1: ECM Retaining Nut
    GM2308927Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  2. Connect the ECM connector and lock the ECM connector locking lever.
    NOTE: Connect the front electrical connector to the ECM first.
  3. Install the ECM bracket (1) to the battery tray and tighten the ECM bracket retaining bolt (2) to 10 N.m (89 lb in).
  4. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals