LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Hybrid/EV System Heating And Cooling >> Repair Instructions >> Battery Distribution Fuse Block Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Identifying Battery Heater Fuse And Fuse Holder
    GM3712074Courtesy of GENERAL MOTORS COMPANY
  1. Install the battery heater fuse (1) into the fuse holder (2).
    2. Fig 2: Identifying Retaining Tabs And Drive Motor Battery High Voltage Contactor Cover
    GM3707867Courtesy of GENERAL MOTORS COMPANY
  2. Install the drive motor battery high voltage contactor cover (2) with the retaining tabs (1).
    3. Fig 3: Identifying Current Sensor
    GM3796348Courtesy of GENERAL MOTORS COMPANY
  3. Attach the current sensor (1) to the drive motor battery high voltage contactor cover (2).
    4. Fig 4: Identifying Connectors, Retainer Clips And Drive Motor Battery High Voltage Contactor Cover
    GM3707863Courtesy of GENERAL MOTORS COMPANY
  4. Install the connectors (3) into the retainer clips (1) on the drive motor battery high voltage contactor cover (2).
  5. Install the drive motor battery cover. Refer to Drive Motor Battery Cover Replacement .
  6. Install the drive motor battery. Refer to Drive Motor Battery Replacement and Shipping Preparation .
scientia non olet · About LEMON Manuals