Clutch Master Cylinders
| Condition | Code | Procedure |
|---|---|---|
| Cover gasket distorted | A | Require replacement of cover gasket |
| Cover gasket gummy | A | Require replacement of cover gasket |
|
NOTE:
This condition may indicate contaminated fluid. Further inspection required.
|
||
| Cylinder leaking fluid from rear of bore | A | Require repair or replacement |
| Cylinder leaking fluid internally | A | Require replacement |
| Dust boot missing | C | Require replacement of dust boot |
| Dust boot punctured | A | Require replacement of dust boot |
| Dust boot torn | A | Require replacement of dust boot |
| Fluid level incorrect | B | Require fluid level adjustment |
| Housing damaged, affecting performance | A | Require repair or replacement |
| Master cylinder has residue in reservoir | 2 | Further inspection required |
|
NOTE:
Do not replace master cylinder unless it exhibits conditions listed for replacement.
|
||
| Pushrod out of adjustment | B | Require Repair or Replacement |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |