LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> SS Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LS3) - Repair Instructions >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

    Fig 1: Fuel Injector, Fuel Rail, Retaining Clips And Seals
    GM3292843Courtesy of GENERAL MOTORS COMPANY
  1. Apply a small amount of clean motor oil to the O-rings (3) and (5), before installing the new fuel injector.
  2. Install the NEW injector upper O-ring seals (3) to the injectors.
  3. Install the NEW injector lower O-ring seals (5) to the injectors.
  4. Install the fuel injector (4) in the fuel rail (1).
  5. Install the retaining clips for the fuel injector (3).
  6. Install the fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement .
    1. Turn the ignition switch ON for 2 seconds.
    2. Turn the ignition switch OFF for 10 seconds.
    3. Turn the ignition switch ON.
    4. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals