LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> SS Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Specifications >> Fastener Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fastener Specifications

Application Specification
Metric English
Front Lower Control Front Link Bolt (Requires a NEW bolt.) 
  • First Pass:
 60 N.m 44 lb ft
  • Final Pass:
 110-130 degrees
Front Lower Control Front Link Nut (Requires a NEW nut.) 
  • First Pass:
 50 N.m 37 lb ft
  • Final Pass:
 115-125 degrees
Front Lower Control Rear Link Bolt (Requires a NEW bolt.) 
  • First Pass:
 60 N.m 44 lb ft
  • Final Pass:
 110-130 degrees
Front Lower Control Rear Link Nut (Requires a NEW nut.) 
  • First Pass:
 150 N.m 111 lb ft
  • Second Pass:
 Loosen 180 degrees
  • Third Pass:
 55 N.m 41 lb ft
  • Final Pass:
 25-35 degrees
Front Stabilizer Shaft Insulator Clamp Nut (Requires a NEW nut.)  37 N.m 27 lb ft
Front Stabilizer Shaft Link Nut (Requires a NEW nut.)  48 N.m 35 lb ft
Front Suspension Strut Mount Nut (Requires a NEW nut.)  55 N.m 41 lb ft
Front Suspension Strut Nut at Steering Knuckle (Requires a NEW nut and bolt.) 
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 85-95 degrees
Front Suspension Strut Nut at Strut Mount Assembly 75 N.m 55 lb ft
Front Wheel Bearing and Hub Assembly Bolt (Requires a NEW bolt.) 
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 25-35 degrees
scientia non olet · About LEMON Manuals