LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Corvette Z51, 2D Coupe, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Place the ignition in the OFF position.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LT1) and Air Cleaner Outlet Duct Replacement (LT4) .
  3. Thoroughly clean the area surrounding the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) mating surfaces of any accumulated dirt and debris.
  4. Disconnect the EBCM electrical connector.
  5. Remove the 4 EBCM bolts (1).
    Fig 1: EBCM Bolts
    GM3318472Courtesy of GENERAL MOTORS COMPANY
  6. Separate the EBCM (1) from the BPMV
    Fig 2: EBCM And BPMV
    GM3318473Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not attempt to lever or pry the components apart.
  7. Clean the sealing surface of the BPMV with denatured alcohol and allow to dry.
scientia non olet · About LEMON Manuals