September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Component Testing
- Ignition OFF, reconnect all harness connectors that were disconnected.
- Disconnect EVAP purge hoses from the EVAP Canister Purge Solenoid Valve. Start engine.
- With a scan tool, command the EVAP Canister Purge Solenoid Valve to 100% duty cycle and check that air can pass through the valve.
- If air will not pass through the valve, replace the EVAP Canister Purge Solenoid Valve.
- With a scan tool, command the EVAP Canister Purge Solenoid Valve to 0% duty cycle and check for no air passage through the valve.
- If air passes though, replace the EVAP Canister Purge Solenoid Valve.
- All OK.