LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Fuel Tank Heat Shield Replacement (LFM) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the fuel tank heat shield (3).
    Fig 1: Fuel Tank Strap Retaining Bolt And Band
    GM3439674Courtesy of GENERAL MOTORS COMPANY
  2. Install the 2 fuel tank heat shield retaining screw bolts (4) and tighten to 6 N.m (53 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the fuel tank strap band (1) and tighten the fuel tank strap retaining bolt (2) to 20 N.m (15 lb ft).
  4. Install the exhaust pipe - rear muffler nut. Refer to Exhaust Muffler Replacement - Front .
scientia non olet · About LEMON Manuals