September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal Procedure
- Remove the engine cover. Refer to Engine Cover Replacement
.
Courtesy of GENERAL MOTORS COMPANY
- Disconnect the spark plug wire (2) to the spark plug.
- Twist each spark plug boot 1/2 turn.
- Pull only on the boot in order to remove the wire from each spark plug.
- Disconnect the spark plug wire from the ignition coil (1).
- Twist each spark plug boot 1/2 turn.
- Pull only on the boot in order to remove the wire from the ignition coil.