LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> SS Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: New Wheel Stud, Washers & Nuts
    GM3512311Courtesy of GENERAL MOTORS COMPANY
  1. Position the NEW wheel stud (1) in the front wheel hub and bearing assembly.
  2. Install flat washers (2) and an old wheel nut (3) on the wheel stud.
  3. Use a suitable tool to prevent the flange on the front wheel hub and bearing assembly from turning.
  4. Tighten the wheel nut until the wheel stud is firmly seated.
  5. Remove the wheel nut and flat washers.
  6. Install the front brake rotor. Refer to Front Brake Rotor Replacement .
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals