September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Rear Object Sensor Wiring Harness Replacement
WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
Preliminary Procedures
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement
. |
| 1 |
Rear Object Sensor Wiring Harness Procedure
- Disconnect the rear object sensor wiring harness electrical connectors from the rear object sensors.
- Disconnect the rear object sensor wiring harness electrical connectors from the rear module.
- Using a suitable tool, disconnect the rear object sensor wiring harness from the rear fascia.
|