LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LUJ, LUV) - Repair Instructions >> Repair Instructions >> Engine Control Module Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Install the engine control module (3) to the engine control module bracket (4).
    Fig 1: Locating Engine Control Module Components
    GM2189268Courtesy of GENERAL MOTORS COMPANY
  2. Install the 4 nuts (1) and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Clip the engine control module bracket (4) to the battery tray.
  4. Connect the 2 wiring harness plug (2) to the engine control module (3).
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  6. Program the ECM. Refer to Control Module References .
scientia non olet · About LEMON Manuals