LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Fuse Block Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Unlock the retaining tab (1) on the battery fuse box cover.
    Fig 1: Battery Fuse Box Cover
    GM2577153Courtesy of GENERAL MOTORS COMPANY
  3. Use a suitable screwdriver (2) to unlock the clip (4) through the window (3).
  4. Open the battery fuse box cover (1).
    Fig 2: Fuse Box Cover, Battery Cable And Nut
    GM2027594Courtesy of GENERAL MOTORS COMPANY
    NOTE: Pull the battery fuse box housing. DO NOT pull the flap.
  5. Remove the positive battery cable to starter nut (2).
  6. Remove the positive battery cable to starter (3) from the battery.
  7. Remove the positive battery cable. Refer to Battery Positive Cable Replacement .
  8. Remove 2 body wiring harness nuts (1) and body wiring harness.
    Fig 3: Identifying Fuse Block, Body Wiring Harness And Nuts
    GM2027692Courtesy of GENERAL MOTORS COMPANY
  9. Remove fuse block (2).
scientia non olet · About LEMON Manuals