Fastener Specifications

Application	Specification
Application	Metric	English
Body Front Suspension Crossmember Reinforcement Fasteners (Convertible)	58 N.m	43 lb ft
Brake Line Bracket to Frame Nut	10 N.m	89 lb in
Brake Module to Bracket Nut	10 N.m	89 lb in
Brake Pipe Fittings	15 N.m	11 lb ft
Driveline and Front Suspension Frame to Body Bolts - Front	160 N.m	118 lb ft
Driveline and Front Suspension Frame to Body Bolts - Rear	240 N.m	177 lb ft
Engine Mount Nuts to Frame	50 N.m	37 lb ft
Front Compartment Air Deflector	9 N.m	80 lb in
Front End Lower Structure Brace Fastener (Convertible)	58 N.m	43 lb ft
Front Lower Ball Joint Nut (Front and Rear)
First Pass	40 N.m	30 lb ft
Final Pass	plus 90 degrees
Front Lower Control Arm Front to Frame Nut
First Pass	50 N.m	37 lb ft
Final Pass	plus 150 degrees
Front Lower Control Arm Rear to Frame Bolt	50 N.m	37 lb ft
First Pass	50 N.m	37 lb ft
Final Pass	plus 120 degrees
Front Outer Tie Rod to Knuckle Nut
First Pass	30 N.m	22 lb ft
Final Pass	plus 120 degrees
Front Stabilizer Shaft Bracket Nuts	43 N.m	32 lb ft
Front Stabilizer Shaft Link Nut	70 N.m	52 lb ft
Front Wheelhouse Liner Fastener	3 N.m	27 lb in
Power Steering Gear to Frame Mounting Bolts (1)
First Pass	50 N.m	37 lb ft
Final Pass	plus 120 degrees
Rear Adjuster Link to Frame Nuts	115 N.m	85 lb ft
Rear Adjuster Link to Knuckle Bolts	175 N.m	129 lb ft
Rear Frame Insulator Anchor Bolts to Body
First Pass	225 N.m	166 lb ft
Final Pass	plus 45 - 60 degrees
Rear Lower Control Arm to Knuckle Bolts
First Pass	40 N.m	30 lb ft
Final Pass	plus 120 degrees
Rear Lower Control Arm to Frame Nuts	115 N.m	85 lb ft
Rear Shock Lower Nut
First Pass	80 N.m	59 lb ft
Final Pass	plus 120 degrees
Rear Shock Mount to Body Bolts	58 N.m	43 lb ft
Rear Stabilizer Shaft Clamp Bolt	58 N.m	43 lb ft
Rear Stabilizer Shaft Link Nuts (W/O FE4, FE5, FE6)	49 N.m	36 lb ft
Rear Stabilizer Shaft Link Nuts (W/ FE4, FE5, FE6)	26 N.m	19 lb ft
Rear Trailing Arm to Frame Bolts	100 N.m	74 lb ft
Rear Trailing Arm to Knuckle Bolts
First Pass	40 N.m	30 lb ft
Final Pass	plus 120 degrees
Rear Upper Control Arm Ball Joint to Rear Subframe Retaining Bolt (1) and NEW Nut
First Pass	80 N.m	59 lb ft
Final Pass	plus 120 degrees
Rear Upper Control Arm Bushing to Control Arm Bolt	160 N.m	118 lb ft
Rear Upper Control Arm Bushing Bracket to Frame Bolts	175 N.m	129 lb ft
Rear Wheelhouse Liner Fastener	3 N.m	27 lb in
Transmission Mount Lower Nuts	60 N.m	44 lb ft
Transmission Support to Body Bolts	58 N.m	43 lb ft
Underbody Brace	58 N.m	43 lb ft
Underbody Side Rail Cross Brace Fastener (Convertible)	58 N.m	43 lb ft
Upper Control Arm to Knuckle Bolt
First Pass	60 N.m	44 lb ft
Final Pass	plus 90 degrees
(1) Use 2 NEW steering gear bolts on the bushing side of the steering gear nearest the power steering gear motor on the right side of the drivetrain and front suspension frame assembly. Only for vehicles with NV9.