October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Rear Object Sensor Wiring Harness Replacement
WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
Preliminary Procedures
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement
. |
| 1 |
Rear Object Sensor Wiring Harness Procedure
- Disconnect the rear object sensor wiring harness electrical connectors from the rear object sensors.
- Disconnect the rear object sensor wiring harness electrical connectors from the rear lamps.
- Using a suitable tool, disconnect the rear object sensor wiring harness from the rear fascia.
|