LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Traverse LS, 4D Utility >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement - Bank 2 >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the intake manifold. Refer to Intake Manifold Replacement
    Fig 1: Identifying Engine Wiring Harness Electrical Connector
    GM1858010Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
  3. Remove the ignition coil bolt(s).
    Fig 2: Identifying Left Cylinder Head Ignition Coils
    GM868186Courtesy of GENERAL MOTORS COMPANY
  4. Remove the ignition coil(s).
scientia non olet · About LEMON Manuals