Circuit/System Verification
- Ignition ON
- Verify the Instrument Cluster Traction Control indicator turns ON and OFF when commanding the Instrument Cluster All Indicators ON and OFF with a scan tool.
- If the indicator does not turn ON and OFF
Replace the P16 Instrument Cluster
- If the indicator turns ON and OFF
- If the indicator does not turn ON and OFF
- Verify the scan tool Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
- If the parameter does not change
Refer to Circuit/System Testing .
- If the parameter changes
- If the parameter does not change
- All OK.