July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

Remove the instrument cluster panel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

Fig 1: Radio & Support Bracket Screws

GM665518

Courtesy of GENERAL MOTORS COMPANY

Remove the screws (2) that secure the radio to the support bracket (1).
Remove the radio from the support bracket enough to access the connectors at rear of the radio.
Disconnect the electrical/audio and antenna cable connectors from the radio.
Remove the radio.

Fig 2: Radio Mounting Bracket & Instrument Panel Carrier Screws

GM639268

Courtesy of GENERAL MOTORS COMPANY

If removing the radio mounting bracket. Perform the following steps:
1. Detach the clip retaining the HVAC harness to the radio mounting bracket.
2. Remove the screws (2) retaining the radio mounting bracket (1) to the instrument panel carrier.
3. Remove the radio mounting bracket from the vehicle.