Removal Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Refer to Cooling System Draining and Filling .
- Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
- Disconnect the engine coolant temperature sensor (ECT) connector (1).
- Disconnect the radiator inlet hose (1), the engine coolant air bleed hose (2) and the heater outlet hose (3), from the water outlet.
- Remove the 4 water outlet bolts (1).
- Remove the water outlet (3) and DISCARD the seal (2).