October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Charge Port Door Replacement
Courtesy of GENERAL MOTORS COMPANY Charge Port Door Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Electrically release and open the charge port door.
- Disable the high voltage system. Refer to High Voltage Disabling
.
|
| 1 |
Charge Port Door Seal
Procedure
Hold the charge port door with one hand and pull the seal from the inside of the door hinge in order to remove. |
| 2 |
Charge Port Door Procedure
- Using a flat-bladed driver, lift slightly upward on the tab at the center of the hinge in order to release the door from the hinge assembly.
- Slide the door outward, away from the hinge and remove.
- Enable the high voltage system. Refer to High Voltage Enabling
.
|