Front and Rear Object Alarm Module Replacement

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front & Rear Object Alarm Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement .
1	Front And Rear Object Alarm Module Nuts (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 6 N.m (53 lb in)
2	Front And Rear Object Alarm Module Procedure Disconnect the electrical connectors. For programming and set up, refer to Control Module References

Callout

Component Name

Preliminary Procedure
Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement .

Front And Rear Object Alarm Module Nuts (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
6 N.m (53 lb in)

Front And Rear Object Alarm Module

Procedure

Disconnect the electrical connectors.
For programming and set up, refer to Control Module References