Overhaul Procedure Steps

Transfer Case Overhaul

NOTE: This article lists the sequential steps necessary to overhaul the transfer case.

^ For the specific step listed below, refer to that step under "Overhaul (Unit Repair)". Overhaul (Unit Repair)

1. Transfer Case Disassemble
2. Transfer Case Cleaning and Inspection
3. Rear Output Drive Housing Cleaning and Inspection
4. Input Shaft Seal Replacement - Right
5. Input Shaft Seal Replacement - Left
6. Front Drive Axle Inner Shaft Seal Replacement
7. Input Shaft and Rear Output Drive Shaft Cleaning and Inspection
8. Transfer Case Assemble