Installation Procedure

WARNING: This page is about a different car, the 2014 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Pedal Position Sensor Bolt

Courtesy of GENERAL MOTORS COMPANY

NOTE: Ensure the fork of the brake pedal position sensor is positioned over the brake pedal post.

Install the brake pedal position sensor to the brake pedal bracket.
Install the brake pedal position sensor bolt (1) and tighten to 3 N.m (27 lb in).
CAUTION: Refer to Fastener Caution .
Connect the brake pedal position sensor electrical connector.
Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration .
Install the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement (Without AAL) , Instrument Panel Lower Trim Pad Cover Replacement (With AAL) .