Circuit/System Verification
- Verify that DTC P1F0E is not set.
- If the DTC is set, refer to DTC P0AA6, P1AE6, or P1F0E .
- Verify that DTC P0A78, P0A79, P0BFD, P0BFE, P0C01, or P0C04 is not set.
- If any of the DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Refer to Loss of Isolation on the High Voltage Main Bus . If all circuits test normal, replace the T6 power inverter module.