Removal Procedure
- Remove the front lower control arm assembly. Refer to Lower Control Arm Replacement .
- Install the lower control arm in a soft jawed vise.
- Assemble the J 2619-01 Slide Hammer and Adapter and the CH-48107 Bushing Remover and Installer.
- Position the J 2619-01 Slide Hammer and Adapter and the CH-48107 Bushing Remover and Installer lower control arm bushing.
- Using the J 2619-01 Slide Hammer and Adapter and the CH-48107 Bushing Remover and Installer , remove the front lower control arm bushing.
- Using the J 5590 Installer and Remover , remove the rear lower control arm bushing.