LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 365 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Wheel Heat Control Module Replacement (Buick, GMC) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Steering Wheel Heat Control Module
    GM4055399Courtesy of GENERAL MOTORS COMPANY
  1. Gently install the steering wheel heat control module (1) in the steering wheel shroud.
  2. Connect the electrical connectors to the steering wheel heat control module.
    3. Fig 2: Steering Wheel Shroud Bolts
    GM4055398Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the steering wheel shroud bolts (1) and tighten to 2.5N.m (22 lb in).
  4. Install Steering Wheel Horn Switch.Steering Wheel Horn Switch Replacement .
  5. Steering Wheel Replacement »Install
scientia non olet · About LEMON Manuals