Door Lock Cylinder Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Door Lock Cylinder

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Enclave) , Front Side Door Trim Panel Replacement - Left Side (Acadia or Traverse) , Front Side Door Trim Panel Replacement - Right Side (Enclave) or, Front Side Door Trim Panel Replacement - Right Side (Acadia or Traverse) . Remove the water deflector. Refer to Front Side Door Water Deflector Replacement . Remove the outside door handle. Refer to Front Side Door Outside Handle Replacement . Remove the front side door outside handle housing. Refer to Front Side Door Outside Handle Housing Replacement .
1	Lock Cylinder Clip TIP: Use a flat-bladed tool to remove the clip.
2	Front Door Lock Cylinder TIP: Pull the lock cylinder from the housing to remove.

Callout

Component Name

Preliminary Procedures

Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Enclave) , Front Side Door Trim Panel Replacement - Left Side (Acadia or Traverse) , Front Side Door Trim Panel Replacement - Right Side (Enclave) or, Front Side Door Trim Panel Replacement - Right Side (Acadia or Traverse) .
Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
Remove the outside door handle. Refer to Front Side Door Outside Handle Replacement .
Remove the front side door outside handle housing. Refer to Front Side Door Outside Handle Housing Replacement .

Lock Cylinder Clip
TIP: Use a flat-bladed tool to remove the clip.

Front Door Lock Cylinder
TIP: Pull the lock cylinder from the housing to remove.