Roof Console Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Roof Console

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Roof Console Assembly Procedure Use a flat-bladed tool on the bezel to release the tabs and gently pull down to remove the roof console. Disconnect the electrical connectors. If replacing the roof console assembly, transfer all necessary components. Bi-level console shown, all others similar and are removed in the same manner.
2	Roof Console Retainer (Qty: 6)

Callout

Component Name

Roof Console Assembly

Procedure

Use a flat-bladed tool on the bezel to release the tabs and gently pull down to remove the roof console.
Disconnect the electrical connectors.
If replacing the roof console assembly, transfer all necessary components.
Bi-level console shown, all others similar and are removed in the same manner.

Roof Console Retainer (Qty: 6)