LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Ignition and Start Switch Housing Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition and Start Switch Housing Replacement

Fig 1: Identifying Ignition & Start Switch Housing
GM1866492Courtesy of GENERAL MOTORS COMPANY
Ignition and Start Switch Housing Replacement

Callout Component Name
Preliminary Procedure 
Remove the turn signal switch bracket. Refer to Turn Signal Switch Bracket Replacement .
1 Ignition and Start Switch Housing Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
8 N.m (71 lb in)
2 Ignition and Start Switch Housing Strap
3 Ignition and Start Switch Housing

Procedure

  1. Disconnect any electrical connectors as needed.
  2. Transfer any parts as needed.
scientia non olet · About LEMON Manuals