LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Tahoe SSV >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: Locating Chassis Wiring Harness Electrical Connector
    GM1911650Courtesy of GENERAL MOTORS COMPANY
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the chassis wiring harness electrical connector (1) from the fuel pressure sensor.
    3. Fig 2: Fuel Pressure Sensor
    GM1911651Courtesy of GENERAL MOTORS COMPANY
  3. Wrap a shop towel around the fuel pressure sensor fitting in order to absorb any fuel that may leak out.
  4. Remove the fuel pressure sensor (1) from the fuel line.
  5. Remove and discard the fuel pressure sensor O-ring seal (2).
scientia non olet · About LEMON Manuals