Conditions for Running the Idle Learn Procedure

With Scan Tool - Reset Procedure

• DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0121, P0122, P0123, P0128, P0171, P0172, P0201, P0202, P0203, P0204, P0222, P0223, P0300, P0351, P0352, P0353, P0354, P0496, P0601, P0604, P0606, P0641, P0651, P0697, P06A3, P1516, P2101, P2119, P2122, P2123, P2127, P2128, P2135, P2138, or P2176 are not set.
• Ignition ON, engine OFF.
• The vehicle speed sensor (VSS) is 0 km/h (0 MPH).

Without Scan Tool - Learn Procedure

• DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0121, P0122, P0123, P0128, P0171, P0172, P0201, P0202, P0203, P0204, P0222, P0223, P0300, P0351, P0352, P0353, P0354, P0496, P0601, P0604, P0606, P0641, P0651, P0697, P06A3, P1516, P2101, P2119, P2122, P2123, P2127, P2128, P2135, P2138, or P2176 are not set.
• The engine speed is between 450-4 000 RPM.
• The engine vacuum is greater than 5 kPa.
• The mass air flow (MAF) is greater than 2 g/s.
• The ignition 1 voltage is greater than 10 V.