LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Tray And Bolts
    GM2027666Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 3 battery tray bolts (1) and tighten to 15 N.m (11 lb ft).
  3. Clip in the radiator surge tank engine hose to the battery tray.
  4. Install battery. Refer to Battery Replacement .
  5. Clip in all wiring harness at the battery tray.
  6. Clip in the engine control module bracket to the battery tray.
  7. Close the hood.
scientia non olet · About LEMON Manuals