LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Engine Control Module Programming and Setup >> Reprogram ECM
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Reprogram ECM

To reprogram an existing ECM, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select ECM Control Module-Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select ECM Control Module-Setup and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select ECM Control Module-Configuration and follow the on-screen instructions.
  5. On the SPS Supported Controllers screen, select ECM Function-Learn/Setup and follow the on-screen instructions.
  6. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  7. With a scan tool, perform The Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
scientia non olet · About LEMON Manuals