LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Captiva Sport LT, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.0L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement - Secondary >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Crossover Tube & Plastic Retaining Tabs
    GM2239779Courtesy of GENERAL MOTORS COMPANY
  1. Partially install the secondary fuel pump module and connect the crossover tube (1) by sliding into position.
    2. Fig 2: Secondary Fuel Tank Module & O-Ring
    GM2239781Courtesy of GENERAL MOTORS COMPANY
  2. Install a NEW O-ring (2) and the secondary fuel tank module (1).
    3. Fig 3: Cam Lock Ring
    GM2239774Courtesy of GENERAL MOTORS COMPANY
  3. Using the CH-48482  wrench , install the cam lock ring (1) by turning clockwise.
    4. Fig 4: Electrical Connector & Evaporative Emission Line
    GM2239771Courtesy of GENERAL MOTORS COMPANY
  4. Connect the electrical connector (1).
  5. Connect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service .
  6. Install the fuel tank. Refer to Fuel Tank Replacement (FWD) , Fuel Tank Replacement (AWD) .
scientia non olet · About LEMON Manuals