LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Caprice 6.0 2 >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Engine Splash Shield Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Engine Splash Shield And Bolts
    GM2657110Courtesy of GENERAL MOTORS COMPANY
  1. Install the engine splash shield (2) on the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the engine splash shield bolts (1) and tighten to 22 N.m (30 lb ft).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals