Circuit/System Verification
- Inspect the B87 Rearview Camera and verify there are no debris on the lens and that the bezel or bezel seal is not damaged.
- If debris are found on the lens, clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- Ignition ON, vehicle in PARK, verify the backup lamps are off.
- If the backup lamps are illuminated, refer to Backup Lamps Malfunction (Automatic Transmission) , Backup Lamps Malfunction (Manual Transmission) .
- Transmission in REVERSE, verify the backup lamps are on.
- If the backup lamps are not illuminated, refer to Backup Lamps Malfunction (Automatic Transmission) , Backup Lamps Malfunction (Manual Transmission) .
- Engine running, transmission in REVERSE, verify a clear rear vision image is displayed on the inside rearview mirror.
- If a clear image is not displayed, refer to Circuit/System Testing .